Plastic products is convenient to our life; but due to plastic is difficult to degradation, disposal of plastic waste has become the big problem. Plastic is derived from oil and natural gas, diesel oil and gasoline are extracted from the oil. Plastic and oil have the same raw materials. Waste plastic of large molecular can be pyrolyzed into diesel and gasoline of small molecules. Combined with our own advantages and introduction of foreign advanced pyrolysis process, Kingtiger Group developed waste plastic to oil plant, turning waste plastic to oil.
All Models of Kingtiger Waste Plastic to Oil Machine for Sale
|Daily capacity||6 MT||10 MT||20 MT||30-50MT||40MT||50MT|
|Working method||Batch||Semi-Continuous||Fully continuous|
|Operating pressure||Constant pressure|
|Reactor rotate speed||0.4 turn/minute||Not rotary type|
|Total power||24 kw/h||30 kw/h||54 kw/h||53.6kw/h||62kw||84kw|
|Reactor size||D2.2*L 5.1m||D2.8*L6.2 m||D2.8 *L7.1 m||L12.5*W2.2*H2.5m||L12.5*W2.2*H2.5m||L12.5*W2.2*H2.5m|
|Space for machine(L*W*H)||20*10*10 m||25*15*10 m||25*15*10 m||20*15*10m||33*15*10m||33*15*10m|
|Fuel||Charcoal, wood, fuel oil, natural gas, LPG, etc.|
Process of Kingtiger Waste Plastic to Oil Plant
1.Put raw materials into reactor by automatic feeding machine. Close and seal the feeding door, and then to open the heating system.
2.There will be part of the gas has been produced when the temperature reaches 150℃, oil and gas will be produced into the manifold when temperatures reaches 220℃. Heavy oil drops down into the heavy oil tank; light oil is automatically into light oil tank after through the water cooling system for cooling and liquefaction.
3.Part of the gars cannot be condensed down; it is called the exhaust gas. They will pass through the water seal system, return to the heating chamber as fuel to heat furnace. Therefore, at the first stage of process, heating fuel is coal, wood, natural gas; but when the temperature rise to 220℃ to 280℃, the exhaust gas can be used as fuel, which can save the fuel cost.